Titan Two PS5 Setup Guide (P5 Adapter)

Step-by-step instructions on how to set up the Titan Two with the P5 Adapter for use on PlayStation 5. The P5 Adapter is required for compatibility with PS5 systems and is sold separately.

Shop PS5 adapters

1

Connect the Titan Two to your PC or Mac using the included USB cable via the PROG port.

2

Open the configuration software on your computer and access the device settings.

3

Set the output protocol to PlayStation 5 and save the settings.

4

Disconnect the Titan Two from your computer, switch the rear port to OUTPUT, and connect the device to your PlayStation 5 using a USB cable.

P5 General Adapter for Titan Two by Besavior - sold by Moddify Tech

5

Connect the P5 Adapter to Port B on the Titan Two.

The “B” LED should turn solid green.

6

Connect your controller to Port A on the Titan Two.

Your Titan Two is now ready to use on PS5.

The device operates through standard controller input signals and does not modify any game software.

Compatibility note: the P5 General (Besavior) and P5Core (Frinkey) adapters do the same job. Both let you use Titan Two on PS5, and you can use either one with this guide. They are made by different manufacturers and are not ConsoleTuner or Sony products.